WiFi Payloads Injector for PS4 Crack Module ESP8266 Serial Hen 1.6 Wireless Decoding Firmware 4.55/5.05/5.07 | Электроника

1. Suitable for all PS4 with 4.05 or 4.55 system; plug the WiFi module on PS4 and it enters decoding mode to crack it.
2. Built-in open source NodeMcu v.10 WiFi module and CP2102 serial port chip;
3. Easy to use, no networking, no setup required;
4. The built-in Payloads program is the latest version, fast startup and stable operation;
5. The firmware can be manually updated, and other ESP8266 firmwares suitable for cracking PS4 can also be updated;
How to USE:
1.Open PS4 console and plug the PS4-wifi into the USB socket. LED will remain bright until the PS4 console is connected to the PS4-WIFI.After that,it will blink only on files transferring.
2.GO to settings--Network--Set Up Internet Connection.
3.Choose Use WI-FI option--Easy.
4.Select WIFI network identified by PS4-WIFI.(Password not required)
5.Set next options to their default values,until you reach the end of the networking setup.
6.After that you can test Internet connection,rember that your PS4 console is connected to PS4-WIFI instead of the Internet.So its normal when shows taht the internetconnection failed.
7.Finally go to the Settings --Users Guide/Helpful iofo,then choose the User's Guide.The website installed into PS4-WIFI will be shown .
8.Now you can choose the payloads you want to use.
9. Click the PS4 controller logo, and will go to the ps4 payloads page.
10. Click the PS4 5.05 button. Start to jailbreak the PS4 system 5.05. After seconds it will show the JS warning webpage.Press OK.
11. If Jailbreak successfully, it will show you're all set!
12. Then you can go to the ps4 Settings, Move to the buttom and you can see the Option "Debug Settings".
Colour:white
Material:plastic
Size:50 x 28 x 8mm
Package Contents:
1 x WiFi Decoding Module for PS4/PS3
1 x USB Cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.