Programmer адресных devices Rubezh пку-1 Prot. R3 | Безопасность и защита

Pku-1 Pret. R3 is a small portable device with autonomous power (4 AAA batteries).
Programmer pku-1 Pret. R3 provides:

View and change the device address
Testing of detectors with a laser tester.

To connect address fire detectors in the design of the programmer, a socket is provided.
The connection of other address devices is made using the terminal terminal set at the top of the pku-1 Pret. R3.
To turn on the power of the programmer, press and hold 2 seconds any key on the keyboard.
Automatic power off-after 20 seconds if the address device is not connected. Automatic shutdown of the programmer-60 seconds after the last press on the key, if the address device is connected.
To set a new address device parameter, you must:

Connect the address device to the socket of the programmer;
Click on the "reading" button;
Use the "+ 1", "+ 10", "+ 100" keys to specify the address of the device;
To complete the address of the device by pressing the write key.

The address of any address device consists of two parts:

The first part is the ALC number of the receiver. This figure is set automatically when the address device is connected to the appropriate ALC of the device.
The second part is the device number in the train, from 1 to 250.

For example, a number 15 detector connected to the ALC 1 receiver will have an address: 1.15.