GERMA 1/2/3 Button 433Mhz smart push Wireless Switch Light RF Remote Control 110V 220V Receiver Wall Panel Ceiling Lamp | Электроника

Technical Data Of Wall Panel Transmitter: Operating Frequency: 433MHz. Battery Model: CR2032 Alkaline Battery (Package Not Included Battery). Material: HDPE(Type2) Plastic. Coding Specification: 1527. Distance: Indoor (20 Meters/65 Feets) , Outdoor (80 Meters/262 Feets). Color: White , Silver, Gold. Size(L/W/H): 86mm x 86mm x 13mm. Weight: 60g/2.1ounces.

Specification Of Receiver: 1, working voltage: AC85-240V 60HZ/50HZ
2, working frequency: 433.92MHZ
3, the total load power: <1000W
4, receiving sensitivity: -108dBM
5, working method: wireless remote control
6, coding method: learning code
7, modulation method: ASK
8, working temperature: -10 deg C ~ +70 deg C
9, size: 72 * 38 * 26 (mm)

Notice:   The package Included different products because you choose a Different options.  

Avoid Darkness and Save Energy

Turn the lights on in advance to avoid darkness. Turn off the lights after leaving, save energy

Remote control distance100m

Can control 1 light from 15 different positions

Working principle

Input and output intermediate access controller. Wireless switch control current is turned off and on at 433 MHz

How to pair signals

1. Press and hold the controller for 3 seconds to enter the code matching mode (the code indicator light flashes 5 times). At this time, press the wireless switch 1 times and wait for 2 seconds. The code is successful (the default is always on);

How to clear the signal

Press and hold the controller for 10 seconds to clear the code (the code indicator flashes 10 times);

How to replace the battery(Low power consumption,Battery used for about 1 year)

Cr2032 battery, standard battery, easy to replace (Does not contain battery)