Powtree For Switch-4C Charging Station Joy Con Charger（4 in 1） by a 5V/2A DC power adapter charger | Электроника

Powtree For Switch-4C Charging Station Joy Con Charger（4 in 1） by a 5V/2A DC power adapter charger | Электроника

For Switch-4C Charging Station User GuideThis charging stand is designed especially for yous Switch Joy Con;

it is powered by a5V/2A DC power adapter.

The SWITCHJOY CON cintroller is charged by the guigerail specially equipped with this product.

This charger has a sleek appearance featuringboth convenience and practica

After cinnecting to the power adapter,four(4)LEDS indicators on the product blink red andgreen once and then light in red constantly,indicating a power connection and ready forcharging.2.For charging a switch joy con,you need connectthe Mirco USB adapter to the charging station first,then plug it into one of controller charging guiderail.NOW the corresponding LED indicator startsto blink red,indicating the charging is in porgress.When this LED indicator lights up in green,chargingis completed.3. Ifall the four (4) controllers are charging at thesame time, all four (4) indicators will blink. Whenone of them turns green, it tells you that that controlleris fully charged. When all 4 LED indicators turn intogreen, it means all the controllers are fully charged.Unplug the power when not in charge.*Notes:

1.After inserting a controller, if the LED indicatorturns green within 3 seconds, the case may be as follows:

A. Battery of the controller in that circuit is fully charged;

B. Battery of the controller in thatcircuit has excessively low voltage or is failed;

C.Failure of this controller Socket;

D. In caseofBor C，we suggest that user examine and repairthe controller before using.

2.If indicator(s) blinks rapidly when connectingthe charger to a power input, it means the powerinput is not normal, overvoltage or under-voltage;you need to replace the power input before operation.

3.When pluging the SWITCH JOY CON controller,the indicator goes off, it means that this guide rail isshort-circuited. You should immediately unplug thepower supply and check the controller, or sendit toa professional service person for repair

Care and maintenance:

●Comply with the following requirements whenusing the product.

1. Do not burn or bake the product, to prevent anyhazard and pollution to the environment.

2. Do not clean the product with corrosive liquid;avoid scratching the casing surface by hard objects.

3. Do not place the product in the followingenvironment conditions: excessively hot, cold orhumid, direct sunshine, or excessively dusty.

4. Remove the power supply if the device is leftunused for a prolonged time.

5. Do not try to disassemble, remove or modify anypart of the product by yourself. Such may resultina damaged product and void the war