Household Digital Display Gas Alarm Wifi Smart Kitchen Leak Detector 1 Pc | Безопасность и защита

Household Digital Display Gas Alarm Wifi Smart Kitchen Leak Detector 1 Pc | Безопасность и защита

Description:
1. Test Method: The Green Light Flashes After Power-On, Which Belongs To The Preheating State, And The Green Light Is Always On After 3 To 5 Minutes. The Alarm Here Enters The Normal Detection State. After Pressing The Test Button, The Alarm Will Emit An "Alarm Sound" To Indicate Detection Normal
2. Alarm Test Method: After The Alarm Enters The Normal Detection State, Place The Extinguished Lighter In The Detection Area Of The Alarm, And The Internal Sensor Of The Alarm Is Tested After 1 To 5 Seconds
3. After The Gas, The Concentration Reaches The Standard, Then A Loud Gas Leak Alarm Will Sound. When The Lighter Is Removed, The Detector Will Stop The Alarm When The Internal Concentration Of The Detector Decreases.
4. Description Of Alarm Test: After The Alarm Is Normal, It Is Best To Use A Lighter Less Frequently To Test, So As Not To Damage The Sensor
5.Light Information: The Power Light Flashes For 05 Seconds And Off For 05 Seconds: Indicates The Preheating State, And The Alarm Light Flashes: Indicates A Gas Leak
6.Installation Position: The Height Between The Wall And The Ceiling Is No More Than 4 Meters, And The Distance From The Combustible Gas Is No More Than 4 Meters
7. Installation Height: Since The P Of Combustible Gas Is Lighter Than Air, It Will Rise When The Gas Leaks. Therefore, When Installing The Detector, It Is Usually Installed In A Higher Place, But Not Too Far Away From The Air, It Is Better To Be Within 2 To 4 Meters.
8.Installation Tool: Fix The Detector Card Holder On The Wall With Mounting Screws, And Then Hang The Detector
9. Installation Environment: When Installing At Home, You Need To Pay Attention To The Installation Location Not Close To The Gas Stove, So As To Avoid The Detector Being Baked By The Stove To Avoid False Alarms Or Cause The Detector'S Air Inlet To Be Unsmooth, Affecting The Sensitivity Of The Detector, And It Cannot Be Installed In Exhaust Fans, Doors And Windows And Bathrooms, Places With Large Moisture

Features:
1.100% Brand New And High Quality
2.This Product Can Be Used As Independent Family Alarm Equipment, And Also Can Be Used As Front Detector Of Alarm System.
3.Easy Installation And Maintenance, Auto Reset After Alarm.
4.High Reliability Sensor.
5.Intelligent Detect Various Combustible Gases.
6.Automatic Fault Detection
7.Quick Alarm
8.Multiple Gas Detection
9.High-Pitched Alarm
10.Easy Installation
11.Smart Chip

Pacakge Include: 1 X Standard Plug Gas Leak Detector

Notes:
1.Transition:1cm=10mm=0.39inch
2.Please Allow 1-3mm Error Due To Manual Measurement. Pls Make Sure You Do Not Mind Before You Bid.
3.Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item. Thank You!