Пленка для обертывания автомобиля 6D Carbon Fiber из ПВХ размером 20 х 50 см с наклейкой декали для консоли, компьютера, ноутбука, телефона и мотоцикла.

Description
DescriptionModel: StripeTotal Quantity: 1 Pieceis_customized: NoWith Tools: NoType Of Sticker: Car BodyStyle: Car Body StickerSticker Placement: The Whole BodyMaterial: PVCPackaging: Not PackagedDesign: StripeType: Glue StickerMaterial Type: PVCSize: 20 x 50 cmCategory: StickersFeatures:
- Abrasion resistance and scratch resistance, the super toughness and resilience can be increased more than 10 times, and the fine scratches can be automatically filled. It is very good for resisting general scratches, rubs and wears.
- Isolation of corrosion which can resist most of the oil, grease, fuel, fat solvent, weak acid, weak alkali, weak salt, completely isolate acid rain, gravel bird excrement, oil and other sustained damage.
- Heat insulation and flame retardant which adapted to the temperature difference between - 40 C and 90 C, with good heat insulation and inert thermal conductivity, fire retardant and flame retardant.
- Bright colors, perfect light reflective film car body sticker.
- Easy removal with no residual ,super thin polymer polymerized hyd-rogen ethylene and imported pressure sensitive oil adhesive.
- Full film laminatio, no splicing, no seams, no traces, with air guide slot, no longer need to worry about bubbles, ensure the integrity of the car surface.Color: Black , Red, Silver, BlueTemperature Resistant: -40°c~90°c (-40°F~194°F)Utilization Scope:
- Automobile parts such as engine cover, rear wing, surround, central control panel, handle, fuel tank cover, buttress plate, etc.
- The overall packaging of automobile accessories, automotive interior packaging.
- Mobile phones, computers and other electronic goods.Tools: Clean cloth, scraper, credit card.
- Clean the sticking position of the car body, conditional use of non fiber shedding cloth dipped in 50% alcohol or acetone to scrub, but also can use soap water; after solvent cleaning the surface to be completely volatilized solvent can be used sticking.
- Under normal circumstances, slowly stick on one side, scrape flat with tools, and expose the paper.
- If the vehicle width is less than 10 cm, you can tear all the stickers down and paste them. However, care must be taken to avoid accidental adhesion or drop the ground and dust.
- Use a clean cloth or scraper (e.g. telephone card or credit card) to obliquely wipe or scrape the film repeatedly until there is no bubble in the sticker. Do not expose or wash the car within 24 hours.
- When the door and the seams are evenly split with the cutter, wrap them inside.Note:
- Because the protective film is relatively thin, some wrinkles will occur during production, but it will not affect the use.
- Not to be exposed to sunlight for 24 hours, not to wash the car within 48 hours.Product Weight: 40 G / 1.41 OuncesProduct Dimensions (L*W*H): 200*25*25 MM / 7.87*0.98*0.98 InchesPackage Weight: 40.0 G / 1.41 OuncesPackage Dimensions (L*W*H): 200*25*25 MM / 7.87*0.98*0.98 InchesRetail Packaging: No, No PackingPackage includePackage Including:
1 x Car Sticker

---