Parabolic MIMO antenna kna27-800/2700 s prefabricated | Communications Antennas

Parabolic MIMO antenna kna27-800/2700 s prefabricated | Communications Antennas

Parabolic broadband directional MIMO antenna KNA27-800/2700C gain 27db is designed to work with 3G 4G LTE modems, routers and other equipment, working frequency range 800-2700 МГц.

Using MIMO technology allows you to increase the data transfer rate to 150 Mbps.

MIMO (Multiple Input Multiple Output) is a method of spatial coding of the signal, which allows to increase the bandwidth of the channel, which for transmission and reception of data, is used. MIMO technology is used in wireless communication systems (Wi-Fi, WiMAX, LTE) to increase bandwidth and more efficient use of the frequency range. Using MIMO technology allows in one frequency range to transmit more data, thus increasing the transfer rate.

The antenna works in wireless communication networks with equipment standards:

• 4G-LTE 2600, LTE 1800, LTE 800;

• 3g-umts 2100, UMTS 900;

& Bull; 2G-GSM 1800, GSM 900;

• Wi-Fi 2400 (IEEE 802.11b, G, n).

The design of the antenna is developed jointly by crocs and miglink, and allows you to transfer data at a significant distance (up to 25 km) in direct optical visibility.

The antenna has a small wind resistance (low wind load), which allows you to install it on a high mast, without fear of swing in a strong wind.

As a rule, solutions based on parabolic antennas are used in conditions of a very weak input signal. They allow you to establish a reliable connection even when antennas of other types are powerless. Compared to panel antennas and wave channels, parabolic antennas provide a significantly higher gain.

Advantages of the antenna kna27-800/2700 S:

• Wide operating frequency range 800-2700 MHz

• High Gain 27 db

• Range up to 40 km in direct optical visibility

• Supports all operators

• Long range of work

• Light Weight

• Portable Design

• No swing in the wind

The antenna design consists of:

• MIMO irradiator

• Wire parabolic straight-focal reflector.

• Radiation fasteners and reflector fasteners.

The antenna irradiator is equipped with two cables rg-316 with F (female) connectors. This allows you to connect the antenna directly to the germobus.

The reflector is painted with powder polymer paint. All unpainted parts have zinc galvanic coating. This guarantees long-term operational stability and trouble-free operation.

⠀

You can also buy from us:

🌍All you need to connect the Internet

📲SIM cards of all operators

🛰Any satellite

💻Digital Equipment

📡GSM antennas, 3G, 4G, WiFi

➡More ads in our profile

⠀

Dimensions (length, width, height), MM 770x920x910

Dimensions, weight, product quantity per package:

Dimensions per pack (length, width, height), MM 925x615x145

Weight per pack, gram 5600

Quantity of goods in the package, PCs. 1

Antennas-characteristics:

Operating frequency range, MHz 800-2700

Antenna gain, DB 27

SWR in the operating frequency range, not more than 2

Polarization Linear

Wave resistance, Ohm 75

Maximum power input, W 10

F-female connector

Permissible wind load, m/s 25

Operating temperature range, os-40... + 50

Maximum permissible air humidity, % 100

Crosspolarizing interchange at least, DB 20

LTE 2600 communication standard

LTE 1800

LTE 800

UMTS 2100

UMTS 900

GSM 1800

GSM 900

WiFi 2400

Multi-band

Pipe mounting type

Type of performance Parabolic