Жидкость для удаления токопроводящего клея 100 мл/250 мл |

Жидкость для удаления токопроводящего клея 100 мл/250 мл |

1. Product introduction:

The ACF removal solution has a good expansion and separation effect on the heated and hardened ACF glue.

2. Product related parameters:

Ingredient: Organic Acid

Storage method: room temperature / sealed away from light

Appearance: colorless liquid

Ignition point: none

Boiling point: 45℃

Ignition point: 470℃

3. How to use:

*Concentration: Use stock solution at room temperature.

*Note: This liquid is strongly acidic, when opening the bottle, do not directly contact with the skin.

*Emergency measures: If the skin accidentally comes into contact with it, please wash it with water immediately. In case of contact with eyes, wash immediately with water and go to hospital for treatment.

Usage and precautions:

1. Local ventilation should be required in the place of use.

2. Wear protective equipment such as gloves when using

3. When opening the ACF remover bottle, the lid should be opened slowly because there may be a protruding gas inside (especially in summer), please pour the ACF remover into the designated small container for use, and cut the 25ML bottle with scissors or a blade. It can be used with a small opening, and it is a good helper for repair.

4. Use a cotton swab to dip the ACF remover on the LCD with hardened ACF and wait for about 20 seconds. After it dissolves and expands, use a cotton swab or a dust-free cloth to dab it with the essence, and it will be clean without damaging the ITO circuit.

The main products are: ACF removal liquid (removal of high and low temperature ACF) G-430, G-450, G-550, G-650, G-750

Before bonding the upper and lower lines of the touch screen, the blue glue can be peeled off with a simple method. This product can be peeled off cleanly at one time, and there will be no residual material for moisture-proof and protection. When used, it is screen-printed on PET, ITO film and ITO glass. After baking to form a film, it can prevent the material from being polluted in the subsequent production process. The peelable blue glue is a one-component touch screen special insulation protection, the main application On the transparent conductive glass and the ITO coating of the thin film in the touch screen, it plays the role of insulation, Hitachi TF-4200EB-452 blue glue, LCD, LCM electronic factory, special purpose,