New Roller Shutter Rolling Door Sensor 433MHz Wireless Magetic Contact Window | Аварийный сигнал

New Roller Shutter Rolling Door Sensor 433MHz Wireless Magetic Contact Window | Аварийный сигнал

New Roller Shutter Rolling Door Sensor 433MHz Wireless Magetic Contact

Door Window Sensor

Door / Window Sensors:

These sensors are used to protect the opening of both doors and windows.If a burglar opens the protected door or window, a magnetic switch inside the sensor,will trip, which sets off the security system.Install one at every entrance to make sure your home is protected. Each sensor is supervised (self-checking) for professional reliability and offers you choice in design and performance.It will work with alarm systems, compatible with most standard security system.Pull out the antenna of the magnetic detector: when the door or window is opened from the closed position, LED 1 will turn to red for 2 seconds,the magnetic detector will be triggered and will send alarming signal to the main unit.

Technical Parameter:

Working voltage: CR2302 3V Battery

Charging Current: 15mA

Static Current: 18uA

Transmission Current: 16.5mA

Transmission Frequency: 433MHz

Transmission Distance: 30m

Application:

Mainly used for roller shutter/rolling door; also applied to other doors and windows

Installation:

Stick part A (magnetic bar) on the edge of the roller shutter/rolling door, and stick part B on the fixed frame of roller shutter/rolling door

Note: The distance of these two parts shall be less than 3-5 cm when the roller shutter/rolling door is closed.

Usages:

Pull out the antenna of the transmitter.

When the roller shutter/rolling door is opened from the closed position, LED 1 will turn on red light for 5 seconds; the sensor will be triggered and will send alarming signal to the main unit.

Indication of low battery: When the voltage of battery is less than 7.5V, LED 2 will straightly turn on red light. At this time, you must immediately change the battery.

Package Include: 

1*Wireless Rolling Door Sensor(battery included)

Note: 

1. This item can't be work alone, with control panel installation please! 

2. 433MHz as default.