Флайткейс + Световой прибор для сцены High Power Laser 8W RGB с анимацией и управлением через ILDA Control, сканер X/Y осей Analog 40Kpps для мероприятий, свадеб и шоу.

Флайткейс + Световой прибор для сцены High Power Laser 8W RGB с анимацией и управлением через ILDA Control сканер X/Y осей Analog 40Kpps мероприятий свадеб шоу.

8W RGB Animation Laser Stage Light System Analog 40kpps scanner 50kpps 8000mW Carton Laser ILDA DMX512/Sound/Auto/SD lazer dj event

Technical specifications:

Output red

>2W/638nm

Output green

>2W/520nm

Output blue

>4W/445nm

laser class:

4

operation modes:

auto mode, music mode, DMX512, ILDA

basic patterns:

128

beam specifications:

Color

Size at aperature

Disvergence

Red

<4*2mm

1.2mrad

Green

<4*2mm

1.2mrad

Blue

<4*4mm

1.2mrad

Laser safety:

Laser safety according to EN 60825: Key switch, Interlock interface.Overload protection on X and Y Galvo for best safeguarding against failure.Mechanical shutter optionally available.

accessories:

power cable, manual, interlock adapter, key switch;

power supply:

110-120V/220-240V switchable AC 50/60Hz

power consumption:

120W

Net weight

11KG,14KG with carton package,21KG with flight case

Case Size(cm)

310*290*170mm

Notice: every batch may have little difference in housing, please carefully consider before you buy

Quickshow program

Introduction 

QuickShow was designed to be an easy-to-use program for anyone wanting to control lasers -- including beginners who have never used a laser before, as well as to the most experienced laser operators. Although ease-of-use was the guiding principal behind QuickShow, it is still quite powerful since it is based on Pangolin's new BEYOND calculation engine and it has many advanced features not found in any other product. 

Designed by laserists for laserists 

During the development of QuickShow, we consulted with laserists of all kinds, including everyone from hobbyists playing shows in their garages, all the way up to top-level Laser DJs, including Glenn Turner of Oracle Projects and Derek Garbos of Garbos Consulting. Derek contributed hundreds of suggestions and he also created the demonstration workspace that comes with QuickShow. 

More help available on the Laserchat forum 

Although we intended QuickShow to be a program friendly enough for beginners to use, QuickShow is also a very deep program. It is not likely that you will ever exhaust the power and capabilities of QuickShow, no matter what your application. As such, we encourage users to check out the Pangolin Laserchat forum, which has many topics intended to help people gain a greater understanding of QuickShow as well as other Pangolin-related products. The Laserchat forum can be found on the Pangolin web site at www.pangolin.com. 

System Recommendations 

Dual-core processor is recommended 

Unlike most of Pangolin's past developments, QuickShow uses the PC to do all of the laser calculations and processing, while output boards such as the FB3 are used only for color conversion and final laser output. Because of this, we recommend you use a dual-core processor (Intel Centrino Duo or Core 2 Duo or equivalent AMD) for best results. 

Monitor resolution of 1024 by 768 or higher is recommended 

QuickShow was designed to work with a single monitor with a resolution of 1024 by 768 or higher. QuickShow will work with a lower resolution, but some of the features on the lower portion of the screen will be unavailable.