Новый профессиональный фонарик NK D011 Дайвинг Lanterna светодиодный лампы XP LV6 LED IP X8 50 м

Новый профессиональный фонарик NK D011 Дайвинг Lanterna светодиодный лампы XP LV6 LED IP X8 50 м

Newest Professional NKTECH MINI NK-D011 CREE XP-LV6 LED IP-X8 50m Diving Flashlight Torch Magnetic Control Rotary Switch 

1X Product Manual

2X Silicone O-ring

1X Thermal White Oil 

1X Product Manual

2X Silicone O-ring

1X Thermal White Oil 

1X  NK-D011 Led Flashlight

1X TrustFire TR-005 Charger

1X TrustFire  26650  rechargeable li-ion battery(5000mAh)

1X Lanyard

1X Product Manual

2X Silicone O-ring

1X Thermal White Oil 

nstructions

On/Off /Adjust modes

Open: click the switch button (hereinafter button) to turn on the flashlight, default high mode.

Shift: when a flashlight turned on, Once clicking the button, then switch to low mode and strobe mode.

Close: after strobe mode, click the button turn off the flashlight.

Way of using battery

Put 1Pcs 26650 lithium-ion battery in the flashlight mount section (Note battery positive and negative direction when placed in), screw the tail section, can be used.

  Notice
  

1. To keep O-ring (seal ring) and thread screw smoothly, please wipe Vaseline oil, please wipe white oil refining and other lubricating substances on the surface 2-3 times per year.

2. After long-term use, O-ring may be damaged. If so, please replace O-ring to keep the flashlight waterproof performance.

3. When battery is low, The power indicator light is red, please replace a new one to avoid damage of battery.

4.Forbid users to disassemble sealed parts of flashlight, otherwise damage will not be free warranty.

5.Forbid to shine the eyes, avoid to cause injury to the eyes.

6.Avoid long-term placement in the sun or high temperature environment

7.Long time no use, please remove battery to store in a cool, dry place.

8.To keep clean and dry, please clean the diving flashlight with fresh

   water after using.

9. As this is magnetic switch, so forbid to place magnet-related items

 near the switch, otherwise the switch could not work Normally.

Self-checking Method For The User Couldn’t Use Flashlight Normally

1. Whether battery of anode and cathode is opposite

(note the positive and negative direction when loading the battery).

2.Whether the power is low

3.Whether the electronic conductive parts of the flashlight is poor contact

(After the user through above checks, flashlight still doesn't work , please contact the manufacturer)