PEI Sheet 4.5" x 3D Printing Build Surface with 3M 468MP Adhesive Tape lot of 2 | Компьютеры и офис

PEI Sheet 4.5" x 3D Printing Build Surface with 3M 468MP Adhesive Tape lot of 2 | Компьютеры и офис

Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.

Single 0.8mm sheet installs quickly on top of existing build platform using the 3M Adhesive Transfer Tape.

Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.

Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results

Includes: 2x PEI Sheet, 2x 3M 468MP Transfer Tape

Product details

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. longtemperature is 150.

How to Use:

Special note - Please remove both sides of the teal colored protective film before using.

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Size：

4.5x4.5 inchIf you need other size please contact use. Thank you!

PEI sheet thickness: 0.8 mm