Shanghai Leici DJS-0.01C type titanium alloy electrode conductance probe sensors can be billing | Обустройство дома

Shanghai Leici DJS-0.01C type titanium alloy electrode conductance probe sensors can be billing | Обустройство дома

The conductivity measuring slot needs to be purchased separately

I. overview

0.01 titanium alloy conductivity electrode is a kind of pure water conductivity measuring electrode. It is suitable for pure water measurement in laboratory and industrial process pipelines by flow measuring method.

The conductance electrode can be used in conjunction with the laboratory conductivity tester produced by our company.

Two notes meaning matter term

OneIn the measurement of high purity water, pollution should be avoided, it is better to adopt sealed and flowing measuring methods.

TwoThe electrode plug holder absolutely prevents moisture from causing unnecessary measurement errors.

ThreeElectrodes should be calibrated periodically, and calibration methods shall be carried out in accordance with the instructions of the conductivity meter.

Three Electrode use procedure:

OneRinse electrodes with high purity water;

TwoScrew the electrode into the measuring tank and connect the inlet and outlet pipe as shown in the measuring tank.

ThreeMake sure there is no air in the water, and there should be no air bubbles in the pipe;

FourOne end of the electrode is inserted into the titanium alloy to measure the electrode, and the other end is connected to an electric conductivity meter.

FiveIn accordance with the instructions of the conductivity meter, the electrode constant is set and input.

SixThe flow rate of the measured solution is adjusted until the conductivity of the display is numerically stable and does not change with the increase of flow rate.