DSTIKE WiFi Deauther V3.5(ESP8266+2dB antenna)WiFi Attack/Control 18650 Powerbank 2A Output NodeMCU Development Kit ESP07 ESP32 |

DSTIKE WiFi Deauther V3.5(ESP8266+2dB antenna)WiFi Attack/Control 18650 Powerbank 2A Output NodeMCU Development Kit ESP07 ESP32 |

One more thing should be careful: If you put in wrong direction of battery, Charging IC IP5306 will burn and you have to replace this IC by yourself! This product does not include 18650 battery.

Update log:

It is a device which performs a deauth attack. You select the clients you want to disconnect from their network and start the attack. As long as the attack is running, the selected devices are unable to connect to their network. Other attacks also have been implemented, such as beacon or probe request flooding.It integrated 18650 battery charging system. You do not need connect a power bank to it.

I made pocket8266 first, then I found pocket8266 is very suitable for spacehuhn's great project: esp8266_deauther It has already been authorized by spacehuhn.

The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network.

Because these management packets are unencrypted, you just need the mac address of the Wi-Fi router and of the client device which you want to disconnect from the network. You don’t need to be in the network or know the password, it’s enough to be in its range.

Disclaimer

Use it only for testing purposes on your own devices! I don't take any responsibility for what you do with this program.

Please check the legal regulations in your country before using it. What it does, how it works and how to protect against it is described on the GitHub page (link above).

Quick start:

For more question please go to

//github.com/spacehuhn/esp8266_deauther#how-to-use-it