KEYECU Replacement Remote Car Key Fob 2 Button 433MHz 4C for Toyota RAV4 Corolla Yaris P/N:60081 | Автомобили и мотоциклы

Item Description                                                                                                                                                                                     Replacement Remote Key Fob 2 Button 433MHz 4C Chip Compatible Part Number: 60081   please check the part number before purchase,which should be on the chip board inside the case or the cover back   Suitable for:   RAV4 Corolla Yaris P/N:60081     Programming Instruction 1 code the remote part  with our following programming manual    2 have the key blade cut by locksmith   3 code the transponder chip with our following manual     Remote part programming   STEP1.       Open Driver side door   STEP 2.       Put the Original key in and out of ignition for 2 times   STEP 3.       Close and open driver door for 2 times   STEP 4.       Original Key in and out for once   STEP 5.       Shut and open door for twice   STEP 6.       Close door   STEP 7.       Put Original Key in the ignition and Turn ignition on   STEP 8.       Turn ignition off and remove key   STEP 9.       Door locks will cycle   STEP 10.   Do the following for all remotes:   Press lock and unlock together for 1s, then press the lock button   STEP 11.   Locks will cycle put key in ignition turn to on then off   STEP 12.   Remove key from ignition, close door and test remote       To Delete All Remotes from the Vehicle    At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.   2 Key part transponder chip programming manual STEP 1.       Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)   STEP 2.       Open and shut door for 6 times   STEP 3.       Remove original key and insert the new key (Do not turn the key, just insert it into the ignition   STEP 4.       Leave for 60s (or til light goes out)   STEP 5.       After 60s security light stops flashing then you can start car.   STEP 6.       Take key out   STEP 7.       Open and shut door       Item Pictures