Ultrathin 3.5mm A4 LED Flat Light Applied to diamond painting tools Diamond Embroidery daimond lichtbak | Дом и сад

Ultrathin 3.5mm A4 LED Flat Light Applied to diamond painting tools Diamond Embroidery daimond lichtbak | Дом и сад

FUNCTIONAL CHARACTERISTICS

LED ultra-thin copy board adopt the side-light technology of LCD (liquid crystal display), with cold lighting source,
the light is even, gentle, environmental and eye-protective. The copy board does not generate heat when it works,
it's much safer. The material of the panel is acrylic, which is with high hardness and good transmitance, it makes
the product anti-scratch, anti-aging and with a longer lifespan.      
there is a smart touch IC chip mounted into the LGP(light guide plate)for LED copy board,this chip is with a good
brightness memory function,the user can adjust the brightness freely.the stylish appearance energy savingmode,-
consideration and humanized design are the mainadvantagers of the LED copy board. Safety Tips
There are precision electronic control components inside of the product, for long-term and reliable using, please
note the matters as below:
Please check whether there has a damage of the power junction carefully, if find something damage, please stop
to use and contact to us to change a new one or do repair. Avoid putting the LED copy board in the environment
of wet, corrosive, ferromagnetic and hyper-thermal a long time. Staying away from the equipment with large
current or strong magnetic field.
It is prohibited that the product is in states of" on" without person around for a long time, please turn off the
power and disconnect the plug after using the LED copy board.
Do not change or disassemble the components and parts of the product, do not use the components or parts
(include the power adapter) that are not provided by our company, otherwise the loss or damage is not covered
by the warranty.
Unpacking
Check the LED copy board carefully after unpacking the carton. Check whether there are some damages of the
goods during the transport, and then count the accessories details.
Operation
to avoid the LED copy board falling or damaging, put it on a flat table,do not use it in a wet or dusty environment
1.connecting the adapter with power and then plug the adapter connector the LED copy board if the indicator
on the LED copy board is on in blue,which means it is normal and the LED copy board is working,if theindicator
ong the LED copy board is still off when connecting with power.please change the adapter
2.touch the touching on-off to control the light brightness.
Note:when first using the LED copy board,if the touching on-off is useless afrer connecting the power,please cut
off the power,and then re-connect the power after 5 seconds,the IC chip will recognize the board again and start
to record,then it will start to work normally.
When turn on it ,if found there's a delicate deviation of the brightness,it is normal and caused by diffuse reflection,
ont quality defect Please feel elieved about usage.

Attentions