loctite 270 glue 50ml thread locking agent high strength | Обустройство дома

loctite 270 glue 50ml thread locking agent high strength | Обустройство дома

What is "ANAEROBIC" of anaerobic adhesives ?

Generally "anaerobic" may sound unfamiliar, but this literally means "without air", in other words, anaerobic adhesives? Removal of air (oxygen) is required for adhesives to cure.

Along with "Removal of air", there is another requirement for the anaerobic adhesives to cure. That is Contact with a metal. In other words, the adhesives do not cure without metal.

222 thread locking agent, low strength, thixotropic viscosity

Suitable for most metal surfaces, removable with normal tools. For M2-M12 thread locking and sealing. Applied to fastener 1/4 "(6mm) or smaller diameter is ideal, with a certain degree of lubricity in order to achieve accurate clamping load.

241 thread locking agent, medium strength

Particularly suitable for applications less active substrate such as stainless steel, plating, including hand tools for removal, the need for maintenance. Meet military standard Mil-S-46163A.

242 thread locking agent, medium strength

Universal, thixotropic viscosity. For M6-M20 thread locking in the seal. Is a common tool to remove the thread locking agent. Has a certain lubricity in order to achieve accurate clamping load.

243 thread locking agent, resistant to oil / medium strength

Fast curing, can be used for inert surfaces, good oil. Easy to disassemble for use on slightly oily, polluted work surfaces. Used for Loctite Pre-Coated Dri-Loc Bolts Re-locked after disassembly. Can be used to lock and seal threads below M20.

262 thread locking agent, medium and high strength

Suitable for most metal surfaces. Thixotropic viscosity, good chemical resistance. For locking and sealing of threads below M20. It is a permanent locking threadlocker with excellent rust and corrosion resistance under extreme chemical / environmental conditions.

263 thread locking agent, high strength

With high temperature and oil resistance, for active metals and inert substrates, viscosity: 400 / 600cP, curing time: initial solid - 5 minutes solid - 24 hours.

270 thread locking agent, high strength

Suitable for most metal surfaces. Thixotropic viscosity, chemical resistance, a permanent locking threadlocker with excellent rust and corrosion resistance under extreme chemical / environmental conditions.

271 thread locking agent, high temperature / high strength

High temperature up to 230 ℃. Can be used for cylinder head double thread locking. Fast curing for most surfaces Includes fasteners that are not surface treated. Recommended for bolts up to 1.5 "(36mm) in diameter. Heating and tools are required when disassembled.

272 thread locking agent, high temperature / high strength

High temperature up to 230 ° C. Can be used for cylinder head double thread locking. Provides fast cure for most surfaces including unwashed fasteners. Recommended for bolts up to 1.5 "(36m) in diameter. Heating and tools are required for disassembly.

277 thread locking agent, high strength

high viscosity. Excellent chemical resistance. For permanent locking and sealing of threads below M36. To prevent rust and corrosion thread, with heat and tools apart.

290 thread locking agent, penetration level

Medium strength, low viscosity, fast curing. For locking and sealing of assembled M2-M12 threads. Can also be used to seal the weld, casting trachoma (¢ 0.10mm below) micropores. To prevent rust and corrosion thread, open the need for local heating and tools.