kegland G2 Wort Heat Exchanger - Counterflow Chiller NEW PIPE home brew | Дом и сад

kegland G2 Wort Heat Exchanger - Counterflow Chiller NEW PIPE home brew | Дом и сад

KL02035   Wort Heat Exchanger - Counterflow Chiller

update to weave PVC

The outer tube of this counter-current coil is now resistant to high temperature of 80 ℃, pressure of 20KGS and blasting pressure of 60kgs.

These copper counter flow chillers are probably one of the fastest ways to chill wort. They are similarly efficient as the 30 plate chillers however they are easier to clean as they do not have all the small crevasses to trap hop material and other

solids.



The copper is a very good conductor of heat. These units are 23cm in diameter and about 18cm high. The input and output are approximately 10mm outside diameter. These can be used with gravity but are recommended to use with a pump.

The tube ttl length is 6.5m,  black part thickness is 2mm, inner copper tube thickness is 1mm



Upgrade your RoboBrew Chiller with a Counterflow chiller to rapidly chill your wort without the messy clean up!

//www.kegland.com.au/wort-heat-exchanger-counterflow-chiller.html

PLEASE NOTE: these inexpensive counterflow chillers have a pliable polymer outer shroud. Because if this, they should not be exposed to restricted unregulated mains water pressures which can easily reach ~100psi when the flow is restricted. Warranty does not cover bursts/ruptures/blowouts of this outer layer resultant from having a kink in your output hose, restricting attachments on the output (such as sprinklers) or similar. Always ensure the output hose is free from any pressure buildup when using unregulated mains water. If you are looking for a more heavy duty, pressure resistant counterflow chiller, we urge you to consider theCoolossus Counterflow Chiller.