Aluminum Fuel Filter Adapter For Chevy GMC 6.6L Duramax LB7 LLY LBZ LMM LML in 2500 3500 Kodiak and Topkick applications HF062-S |

Aluminum Fuel Filter Adapter For Chevy GMC 6.6L Duramax LB7 LLY LBZ LMM LML in 2500 3500 Kodiak and Topkick applications HF062-S |

Aluminum Fuel Filter Adapter For Chevy GMC 6.6L Duramax LB7 LLY LBZ LMM LML in 2500 3500 Kodiak and Topkick applications HF062-S

Applicable models:
For 2001-2016 Chevy/GMC 6.6l Duramax LB7/LLY/LBZ/LMM/LML in 2500, 3500, Kodiak and Topkick applications.

Specifications:
Gross weight: 0.6kg
Size: show as pictures.
Material: Aluminum
Color: Red/Silver/Blue/Black

Features:
1/4" fuel filter inlet holes which reduces stain on the CP3 Pump.
Large Center fuel outlet hole measuring 5/8"
3.50" Hex for ease of removal
The adapter has been engineered from the ground up to provide the best adapter on the market

Installation :
Step 1 : Disconnect the factory fuel filter heater wire on the top of the factory fuel filter head and unplug your filter sensor at the bottom of your factory filter
Step 2 : Drain and remove your factory fuel filter
Step 3 : Disconnect the factory filter head by removing the bolts securing the filter head to the mounting bracket
Step 4 : Reattach the filter head to the using the supplied spacer and bolts,and lubricate the O-rings and thread the filter adapter onto the factory filter head and tighten
Step 5 : Reconnect the factory fuel filter heater wire. Lubricate the filter seal and hand tighten onto the adapter
Step 6 : Replace the plastic factory air bleeder screw with the new aluminum bleeder screw.Tighten your air bleeder screw,start the engine and check for any leaks.(If you have issues holding a prime,remove the adapter/filter and relube the O-ring/seal to ensure you have a good seal)

Note:

Please allow 1-5mm deviation due to manual measurement.

Due to light and screen difference, the item's color may be slightly different from the pictures.
 
Package included:
1*Fuel Filter Adapter
Fuel filter not included