2018 New LED Skin Rejuvenation Mask Spa Hydrogen Care Equipment | Красота и здоровье

2018 New LED Skin Rejuvenation Mask Spa Hydrogen Care Equipment | Красота и здоровье

2018 New LED Skin Rejuvenation Mask Spa Hydrogen Skin Care Mask Equipment

is the newest advance in non- skin resurfacing. it is the only hydradermabrasion equipment combining cleansing, exfoliation, extraction, hydration and antioxidant simultaneously, resulting in clearer, more beautiful skin with no discomfort or downtime. is soothing, moisturizing, non-invasive and non-irritating.

Features:
1. High concentration of hydrogen water: this machine could conversion of mineral water to hydrogen water.
2. Ultrasonic fine spray: Using 110KHz ultrasonic wave, produce unit spray, also called "mist spray".
3. Ensures no dead end 270° spray allows you to enjoy the spa at any angle.
4. The general pore size is 25nm, the size of the water molecule is 0.4nm. Therefore, the speed of absorption is very fast.
5. Easy to operation, which is suitable for professional use or home use.

Specification:
Item Type: LED Hydrogen Mask
Power: DC 12V, 4A
Water Loading: 300ml
Size: 49.2 x 45.5 x 44.8cm / 19.4 x 18.0 x 17.6inch
G.W: 5.6kg
N.W: 3.6KG

Package List:
1 x Main Machine
1 x Mask
1 x Bag of Accessory

Instructions:
1. Assemble the instrument.
2. Connect the power supply.
3. When the power connection indicator (medium) indicator light is on, it is in the standby state.
4. Unscrew the top small cover counterclockwise (the large cover is for cleaning).
5. Add water (300ml when topping up) and turn the lid in a clockwise direction.
6. Parameter adjustment, adjust the level according to the level button (1. It can be adjusted in 3 stages. 0.2. Default mode: medium (middle) 3. Level adjustment can also be performed during operation)
8. Place the instrument in the middle position above the face and the operation begins.
9. Press the start/stop button to start the operation (Automatically close after 10 minutes.)

Note:
It is recommended to turn on the machine and wait for 1-2 minutes before using it for the first operation. This is the process of waiting for the filter to be saturated.