Automobile Electromagnetic Induction Reversing Reverse Radar Anti-Collision Parking Sensor | Автомобили и мотоциклы

Peel and Stick foil tape sensor for vehicles with non-metal bumper
Electromagnetic field changes as object get closer to the bumper
Wires to "Reverse Lamp " (12 Volts DC)
Size: Main Module: 5.8 x 3.4 x 1.7 cm,Cable length:52cm
Alarm Beeper: Approx 4.8 x 3 x 1.6 cm,Cable length:about 400cm
Automatically beeps to alert near-by objects
Detects people,vehicles,small and high kerbs,garage doors,pillars,posts,walls,fences,barriers,skips,etc
Improves parking safety
Minimize bumper damage
Indicates object distance with different beeping frequencies
Easy and concealed"inside bumper"installation
Installation:
To safety test the U301,the vehicle's engine MUST BE OFF and the parking brake must be engaged
1.Turn the vehicle's ignition key to the ON position,but do not start the engine
2.Place the vehicle's transmission in reverse gear
3.Stand about 6 feet away from the bumper and slowly approach the vehicle
4.At distance from 27.5 to 15.75 inches,you will hear a fast beep.At distance from 15.75 to 8.0 inches,you will hear a continuous beep
Note:Bumper does not need to be removed.No holes need to be drilled
Frequently Asked Questions:
Q:Will the Back-up Sensor prevent me from hitting any object behind my car?
A:No.The Back-up Sensor is only a warning device.If you back a car too fast,or your reaction time is slow,you could still strike an object
Q:Does the weather affect the sensitivity of the Back-up Sensor?
A:Yes.Rain can reduce the detection range slightly
colour:black
Material:TFT plastic
Package Contents:
1 * Electromagnetic Reverse Radar
1 * Alarm Beeper
1 * Sensor Antenna
2 * double-sided stickers
1 * Instructions
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.