VGA+DVI M.RT2261 LCD/LED Controller Driver Board For LTN121X1-L02 LVDS Monitor Reuse Laptop 1024*768 | Компьютеры и офис

VGA+DVI M.RT2261 LCD/LED Controller Driver Board For LTN121X1-L02 LVDS Monitor Reuse Laptop 1024*768 | Компьютеры и офис

VGA+DVI M.RT2261 LCD/LED Controller Driver Board For LTN121X1-L02 LVDS Monitor Reuse Laptop 1024*768

Note:

 Please leave a message of your LCD model and version when you make the payment ,thanks ! 

This is a great set of easy-reassembling LCD controller kit which is used to turn a unused LCD panel into a desktop/PC 
monitor. It will be a surprise that your unused LCD will be of good use, and no longer be a waste.  Or it is a very interesting 
things to make a monitor successfully by yourself.  M.RT2261 is a LCD control board, it supports between 14 and 19 inch LCD

panel with single /dual LVDS interface.And the resolution is up to 1920x1080.

Description:

M.RT2261 is a monitor control board. It can support LED/LCD panels which resolution is up to 1920x1080

M.RT2261 can synchronize with computer automatically.Synchronization require the synchronous signal which horizontal

and vertical syncare separated.

M.RT2261 can support dynamic contrast control,headphone input and Digital volume control simultaneously.

M.RT2261 is with interface show in below:

 Board Size:4.21in(L)*2.03in(W)*0.71in(H)

 DOWNLOAD the specification of controller board

Package Including:

  1x LCD/LED Controller Board(M.RT2261)

  1x CCFL Invertor Board

  1x Keypad with Cable

  1x LVDS Cable

Buyer Tips:

 Please make sure the vertical and horizontal driver inside your LCD still works,this board can not fix it if it doesn't work.

 * Please order directly if your LCD model number is same as our title, or please DO leave us a message with your LCD 
model and version when you are ordering.

   Q: How to find my LCD model number and version number?

   A: Normally the label on LCD backside includes information such as LCD model and  version number.

 * Please prepare VGA cable and DVI cable and power adapter for the controller board you bought. They aren't included in the kit.

 * This board requires DC 12V 3.3A input power for LCD size under 17inch, and DC12V 4A for LCD between 17 to 22 inch.  
    The LCD cannot be lit up if the power current is not applied as stated. 

 Please pay attention to the working supply for controller board as the following:

 The supply as left picture showed can work but the right one doesn't!!

 * To protect this board from damage, high quality power adapter is recommend

    12VDC 3.3A power adapter

     12VDC 4.0A power adapter

Install Tips:

 * Keep the backside away from metal subjects when the power is applied, or it may cause short-cut or damage of main IC.

 * Since the driver and voltage varies from different LCDs, please do not any change jumpers on the board, or use the kit for 
    other LCD with different model number , otherwise you may damaged your LCD.  Please consult us if you have any other 
    question or want to use the kit for other LCD panel.

 * link the key button board, (starts from left side, and leave some pins on the right blank), and connect  inverter with controller 
    board, then Connect 12V DC power to the board for LCD  CCFL backlight lamp test.
    If the LCD panel is lit up, it means that backlight of the LCD is working, then you can turn off  the power. If the LCD does 
    not lit up, then the backlight is broken, you need to replace the lamps.  

 *According the above operated way , then unplug the power supply, Connect LVDS with the LCD connector and control board 

   (connect the marked LVDS area with 1st pin), and then insert the VGA or HDMI or DVI input  signal(Default VGA input,
   please use the key buttons to switch for DVI input)  .

 *Apply with DC 12V power

 *Complete connecting kit.

 Here is the assembled LCD set:

 Now enjoy the success of DIY monitor, our professional engineer will always be happy to support you 
 if there is any question, thank you! 

 You can also view our video guide on youtube, thank you!

  The link of introduce : //youtu.be/s9xpn80muEk

We accept payment via Escrow, you can pay with your credit card or debit card through Escrow.

Combined Shipment
For multi-item orders, please DO NOT submit payment until you have won all items you wish to combine.

Handling & Shipping Time
Handling Time: 1 business days
Shipping Time: 11-30 Business days

We stand behind all of our products with a 30-day, money-back guarantee.

Our customer service reps respond to inquiries via the eBay messaging system daily on business days.
Our working hours are(Monday - Fri-day):

CN: 9 AM - 6 PM       RU: 4 AM - 1 PM
AU: 11 AM - 8 PM      UK: 1 AM - 10 AM

DE: 2 AM - 11 AM      US: 8 PM - 5 AM ET