LIVTER steel cutting hss dmo5 circular saw blade | Инструменты

LIVTER steel cutting hss dmo5 circular saw blade | Инструменты

Material: M2(HSS-Dmo5)/M35(HSS-Co5%)/M42/W5

Surface Treatment: VAPO,TIN,TICN,TIALN.

Tooth form: A/AW/B/BW/HZ

Bore Diameter: 32mm,40mm,50mm or as request

Specification: Please refer to standard table, we also can produce as customer's request.

Application: hss dmo5 circular saw blade for cutting various steel material and form such as solid bar, pipe, rail etc. - For cutting various non-ferrous material as like aluminum, copper, bronze, brass of pipe, bar, sash and plate etc.

Company Information

Shipment

FAQ

How to choose the teeth

The different kinds of tooth forms are used according to different requirements of cutting.

How to choose the right tooth form?

1.Tooth form "A" and "AW"

For thin Metal Slitting steel cutting hss dmo5 circular saw blades with a tooth pitch up to approx. 3.0mm Advisable for brass, tooth form "A" is
suitable for slotting materials. All teeth of tooth form "AW" are bevelled alternatively.

2.Tooth form "B" and "BW"
Suitable for cutting tubes and profiles made of steel or non-ferrous metals. Tooth form "B" is specialized for cutting very thin walled popes and profiles. All teeth of tooth form "BW" are bevelled alternatively.

3.Tooth form HZ
This tooth is also known as form "HZ". Teeth are ground according to the roughing and finishing tooth system. A tooth pair is consisting of one roughing tooth(1/3 cutting width) and one finishing tooth(2x1/3 cutting width). According to the triple chip geometry the roughing tooth is approx.0.2-0.3mm higher compared with the finishing tooth. Tooth form "HZ" is suitable for cutting solid materials.

4.Tooth Form BR
Tooth form BR is a parrot tooth with chip breaker.This tooth form is sutiable for cutting pipes under high performance conditions because the teeth are side cutting.