DC Smart Voice Control Light Sensor Switch Wall Mounted Sound & Controlled Activated Lamp | Обустройство дома

DC Smart Voice Control Light Sensor Switch Wall Mounted Sound & Controlled Activated Lamp | Обустройство дома

This switch can not control fluorescent lamps, such as fluorescent lamps！

Please be sure to refer to the following precautions. 1. The switch for the sound and light control switch, you must also meet the voice and light control. Must be in the environment below the 5LUX brightness, more than 75 decibels above the sound stimulus can trigger lighting delay. (Delay time of about 30 seconds) 2. Load Note Incandescent ≤ 100W；7W ≤ energy-saving lamps ≤ 40W；3W ≤ LED ≤ 30W; 3. Sensory components are good components, loss will not be so fast, if the sensitivity is not the same, because the environment of the sound or brightness is different. (Some customers, touch switch on the light, because when touched, touch the switch produced a sound, covered the light hole, while meeting the voice and light control, so trigger lighting delay) 4. Environmental simulation: about 2 meters in place, clap your hands will trigger the lighting delay. Sound and light control, then, too dark case, will be too sensitive (with sound on the light), the surrounding is too bright, it will lead to insensitive (sound great bright). For the sound and light control, then, in the dark environment with sound stimulation, you can control the light, then it is qualified. 5. The switch is a single-control switch, the fire into the fire, the fire into the live, the fire is not charged, a single charged will not burn. If the access to the zero line or dual control of the two FireWire, is burned. Please verify the line, if not a single-control lines do not buy.