4pcs TL-Smoother Plus Addon Module 3D Printer Set Filter for Pattern Elimination Motor Drivers | Обустройство дома

4pcs TL-Smoother Plus Addon Module 3D Printer Set Filter for Pattern Elimination Motor Drivers | Обустройство дома

Features:
1.TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor, especially the parallel arm configuration of mechanical effects is very important. Reduce vibration and reduce the smoothness of noise.
2.TL-Smoother is an add-on module for 3D printer stepper engines. The board provides a backup diode (carriage return diode) for the engine output, thus preventing induced voltages when the drive is not powered.
3.In the DVR8825 stepper or A4988 / 2 drives, you will move more smoothly, especially on a triangular 3D printer. I3 and UM models are also available, and different machines have different trimming effects.
4.8 large package (SMC) diodes provide better heat dissipation and can handle larger motors and larger motors than small diodes.
5.Reduce vibration and reduce the smoothness of noise.
6.All motherboards have a strong patch diode, the signal is more stable and the service life is longer.

Descriptions:
1.TL-Smoother is an add-on module for the 3D printer stepper engine driver.
2.The board provides a backup diode (carriage return diode) for the engine output to provide electromagnetic voltage protection when the drive is not energized. In the DVR8825 stepper or the A4988/2 driver, you get smoother movement, especially on a triangular 3D printer.

Specifications:
Material: Metal
Color: Multicolor
Weight: 20g/0.71oz
How to Use: Connect This Tl-smoother Module to the Corresponding Drive Socket and Motor of the Motherboard

Package Informations:
Package Size: 110x60x40mm/4.33x2.36x1.57in
Package Weight: 30g/1.06oz
General Package

Package Included:
4 x 3D Printer Filter
4 x DuPont Lines

Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-5 mm deviation. Thanks!