6.35/12.7mm Shank Ball T Type Slotting Cutting Tenon Knife Milling Cutter for Home DIY Doors Windows Tools Carpenter | Инструменты

Tool selection:
To achieve the purpose you require, please use a tool with a short blade edge as much as possible. If the blade is too long or the tool body is too long, it will cause vibration and deflection during processing, resulting in damage to the tool and affecting the quality of processing. It is recommended to use a tool with a larger handle
Tool operation:
1: Woodworking milling cutter is specially designed for portable and desktop woodworking engraving machines, can not be used on electric drills, drilling machines and other machines. 2: The tool can eat smooth surfaces for hardwood, softwood, synthetic boards and other wood processing , But to avoid processing copper, iron and other metal materials and non-wood materials such as sand and stone, 3: must use the appropriate size of the jacket, because the wear is serious, not round and the inner hole with a tapered jacket can not provide enough Tighten the force, causing vibration or twisting the handle and falling off. 4: Do n't think the new jacket is safe and reliable. When the tool is found to have uneven contact marks or grooves after the tool is clamped, it means there is slippage. If the tool moves and the inner hole of the jacket is deformed, the jacket should be replaced immediately to avoid accidents. 5: After the tool is clamped, if the tool is found to be boun cing when it is working, it should be stopped immediately. Repeat the clamping several times to let The tool shank and the jacket are in full contact, and work is in progress. 6: The contact between the tool shank and the jacket should be good , fully inserted into the jacket, and tightened firmly, so as to provide sufficient tightening force to the tool. Only a small part is inserted into the jacket. 7: The operation is to use appropriate eye and ear protection devices. 8: The body , clothes and other debris cannot be close to the working knife