Right Power Sliding Door Center Hinge Roller Assembly Fit For Honda Odyssey 1999 2000 2001 2002 2003 2004 72520-S0X-A53 | Автомобили и

Right Power Sliding Door Center Hinge Roller Assembly Fit For Honda Odyssey 1999 2000 2001 2002 2003 2004 72520-S0X-A53 | Автомобили и

This Is Aftermarket Replacement Item But Not Genuine

Product Dimension:

Feature:

1) According to the original factory specifications.

2) Perfect match for the original one.

3) Easy installation.

4) Stable characteristics, high reliability.

TIPS for Replacing the Sliding Door Roller:

The Roller assembly is located behind the sliding door.

In order to remove the rail cover, the tail light assembly must be removed first.

Press the door OPEN button and turn door switch OFF from control panel (left of steering wheel).

Remove screws on small body panel which covers the cables and pull off body panel cover.

The rail/body panel slides back about 2 inches and then pulls off exposing the cables.

To mark alignment.

Use a felt pen to trace around where the roller assembly mounts to the inside of the door.

Remove or at least pull back the interior side panel slightly (located between sliding door and trunk).

This is necessary in order to loosen the door drive cable inside the car enough to remove the cables from the rollers.

Unhook the cables and remove old roller.

Install new sliding door roller.