EPMAN 2" 52mm 10 Color LED Backlights Smoke Face Bar Turbo Boost Gauge Meter w Sensor Mount Bracket Cup Holder EPXX707 | Автомобили и

You are buying on 100% Brand New of:

 

EPMAN 2" 52mm 10 Color LED Backlights Smoke Face Bar Turbo Boost Gauge Meter w Sensor Mount Bracket Cup Holder EPXX707

 

Product Description:
Item name: Boost Gauge BAR
Diameter: 2"/52mm
Current: IGN MAX 0.3A ILM 0.3A
Power: DC(10-15V) 12V Professional
Reading range: -1~2 x100kpa
Sensor Thread Size : 1/8" NPT
***LED super Color: 7 Color display+3 Light Color

Package includes:
1 x Boost Gauge
1 x Mount Bracket Cup
1 x Meter Wire
1 x Power Supply Wire
1 x Boost Sensor Wire
1 x Three Way Joint ID 4mm
1 x Rubber Hose ID 4mm
1 x Double Sided Tape
2 x Buffer
1 x English Manual
(same as the picture)

Features:
-2" (52mm) diameter gauge.
-Black dial face when ignition is off.
- 10 colors backlights can be selected, and it can memory the setting in the both daytime and night mode.
-Brightness can be selected in 6 different levels, and it can memory the setting in the both daytime and night mode.
-3 buzzer types can be selected (slowly →fast→all the time).
-4 buzzer levels can be selected. (silence →resounding)
-5 Varations open ceremonies can be selected.
-A warning value (arbitrary) can be set and the warning buzzer can be selected from three variations or turn off.
-Data obtained during driving (top value and warning value) can be stored up, and the top value can be reviewed and cleared.
-Flat glass,high-definition scale and long,narrow pointer provides accurate indication and high visibility.
-Brushless stepping motor is used to enable a smooth, instantaneous response to high performance sport driving.

Common Button Operation:
1.There is a button in the backside of the gauge.They are used to review and clear top value,change the colors, adjust the brightness, choose the buzzer, set the warning etc.
2.Short press to switch between different functions settings,long press until buzzer sounds, then enter the setting mode.It will return to normal status when the button is released after 5 seconds.

52mm Gauge Pod:
Universal Pod made with black ABS Plastic
Pod can hold all 52mm (2 inch) gauges
Pod holder can be position on your dash, any little flat surface, use as a starter mold for your fiberglass

There are several of the same series:
1:Turbo Gauge(BAR) (-1BAR-2BAR)
2:Water Temp Gauge (20-120 Celsius)
3:Oil Temp Gauge (50-150 Celsius)
4:Oil Press Gauge (PSI) (0PSI-140PSI)
5:Turbo Gauge(PSI)(-30PSI-30PSI)
6:Volt meter (10V-15V)
7:Oil Press Gauge(BAR) (0BAR-10BAR)
8:Exhaust Gas Temp Gauge (2-11 x100 Celsius)
9:Tachometer (0-9x1000 RPM)
Please click here to see details
    Boost Gauge BAR: Reading range: -1~2 x100kpa   Package includes: 1 x Boost Gauge 1 x Mount Bracket Cup 1 x Meter Wire 1 x Power Supply Wire 1 x Boost Sensor Wire 1 x Three Way Joint ID 4mm 1 x Rubber Hose ID 4mm 1 x Double Sided Tape 2 x Buffer 1 x English Manual Boost Gauge Bar
Note: ● The product is designed for use on 12v vehicles.Do not install this product on vehicles with 24v systems. ● Do not perform installation of this product immediately after the engine has been switched off. The engine and exhaust system are extremely hot at this time and can cause burns if touched. ● The LED color display of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. ● Instructions Is Included.Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.  

All items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended.