hand engraving machine graver helper set with 2 handpieces Graver Engraving Machine Jewelry Equipment Engraver Tool Double Ended | Украшения

hand engraving machine graver helper set with 2 handpieces Graver Engraving Machine Jewelry Equipment Engraver Tool Double Ended | Украшения

* New Arrival Graver Jewelry Equipment.

* Jewelry engraving tool.

* Jewelry making equipment.

* Delivery on time.

Technique Parameters

* Power: 60W

* Voltage:220V,50/60Hz

* Rotate Speed:100-4000RPM

* Air Pressure:0-3kg/cm²

* Weight:8kg

* Volume: 32cm x27cm x 25cm

Installation:

1. Size carved handle. Foot opening panel interface connector.
2. The air compressor trachea insert air intake on the back of the engraving machine, it is recommended that the installation of relief valves and water separation filter, air compressor and engraving machine pipeline to increase machine performance.

Methods of operation

1.Shut down the switch of AIR PRESSURE CONTROL KNOB & AUXILIARY AIR OPEN / CLOSE.KNOB FOR OUTLET BELOW to avoid the damage of pressure gauge and reducing valve due to strong air pressure.
2. After connecting all accessories with the machine, turn on the power .(The indicator light is shine )
3. Put the ON/OFF Switch to Position (1) or (2).
4. Adjust the air pressure and the rotate speed , hold the handpiece like a table knife , step on the foot control to max ,adjust AIR PRESSURE CONTROL KNOB slowly to the gauge show 1.5-2kg meanwhile adjust the STROKES PER MINUTE SELECTOR KNOB , in order to make the impact of handpiece No.1 reach the maximum., then press the AIRPRESSURE CONTROL KNOB.
5. Loose the foot control , the graver handpieces stop working , intall the graver tools into the handpiece.
6. Turn the HANDPIECE SELECTOR KNOB to Switch Handpiece No.1 No.2 .
7. When you using Hnadpiece No.2 –rotate handpiece , shut off the power , turn on AUXILIARY AIR OPEN CLOSE.KNOB FOR OUTLET BELOW to adjust AIR PRESSURE CONTROL KNOB.
8. Step on the foot pedal to control impact.

Maintenance

1. Engraving machine used for a period of time, it should be the back of the machine reducing valve cups drained.
2. To mechanical oil adding an appropriate amount of the 10th size carved handle!
3. If the fault, not blindly demolished, the staff checks and maintenance.

Package Included

1 x Graver helper(Graver Engraving Machine)

1 x Foot Control

2 x Cable

2 x Handpieces

Payment:

• We accept alipay here.
• All major credit cards are accepted through secure payment processor ESCROW.

Warranty and Guarantee:
• 12 months Warranty. Buy with confidence!
• If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.
• If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
• If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.

Other Policies:
• We are not responsible for any custom duty or import tax.
• We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.
• All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible.